Palitoy Talking Dalek Replacement Parts
by Robert Green

Download: https://www.thingiverse.com/thing:4567634
Notes: Robert has used these parts to restore the appendages from a vintage 1975 Palitoy Talking Dalek. (Which were notoriously easy to lose) You can watch a YouTube video of his progress here.

1:6 Scale 3rd Doctor Head
by David Turner

Download: https://drive.google.com/file/d/1Zm1WILTArqb1Il2HfB3bB7PggFGLiBan/
Notes: The first of what will hopefully be many 1:6 Big Chief scale heads designed by David Turner.
Note that it is still possible to print this at Character options 1:13ish scale, just reduce it by 44% in your slicer program before printing. (If you're printing resin, because there usually is some shrinkage, you may need to print a couple between about 43% and 48% to see which lines up best with whatever body you're using. )

1:6 Scale Tloxtl Head from The Aztecs
by David Turner

Download: https://drive.google.com/file/d/1JqIZ_hyrgpa9sSYAQxtepNaXjHEpGgua/
Notes: Another great 1:6 Big Chief scale head designed by David Turner.
Note that it is still possible to print this at Character options 1:13ish scale, just reduce it by 44% in your slicer program before printing. (If you're printing resin, because there usually is some shrinkage, you may need to print a couple between about 43% and 48% to see which lines up best with whatever body you're using.)

1:6 Scale Mavic Chen Head from The Daleks' Master Plan
by David Turner

Download: https://drive.google.com/file/d/1ROqqb5SzB_-I_Rn9Qb_4c4XGYVdsHEgx/
Notes: Another great 1:6 Big Chief scale head designed by David Turner.
Note that it is still possible to print this at Character options 1:13ish scale, just reduce it by 44% in your slicer program before printing. (If you're printing resin, because there usually is some shrinkage, you may need to print a couple between about 43% and 48% to see which lines up best with whatever body you're using.)

1:6 Scale Meddling Monk Head from The Time Meddler
by David Turner

Download: https://drive.google.com/file/d/1P9WOcGyIwZBaoa_JwlTUxXrZ0ZGsTWa_
Notes: This is the original 1:6 Big Chief scale version of the head that was used in the 5.5" scale remix.
If for some reason, you want to do a 5.5" custom and only want the head, you should probably go with the remix version since it includes a neck and has a hole for a peg mount.

Barbara Head
by Leighton Humphrey

Download: https://drive.google.com/file/d/1WjgLEYeNA_h58ETWQ_-arofVMZhh8jd1/
Notes: To print at 5.5" scale, shrink to about 10% of original size in your slicer.

1st Doctor Heads and Hats Galore!
by Leighton Humphrey

Download:
1st Doctor Heads: https://drive.google.com/file/d/1vI7GDPrbXz5vkdxzoNJWwN-RtTZKI1YL/
Hats galore! https://drive.google.com/file/d/1UBtoBzkYol5AQNs2wi2Qw8fUncivk-MN/

Notes: To print at 5.5" scale, shrink to about 70% of original size in your slicer.

7th Doctor Heads from the TV Movie
by Leighton Humphrey

Download: https://drive.google.com/file/d/163xpCObsjcIQaXjuhCP-ASx3XRUstH28/

Notes: To print at 5.5" scale, shrink to about 45% of original size in your slicer.

3rd Doctor Head from Invasion of the Dinosaurs
by Leighton Humphrey

Download: https://drive.google.com/file/d/1sU9iSeRfDCSuaPYzAopbInH6ZijY0n2K/

Notes: To print at 5.5" scale, shrink to about 47% of original size in your slicer.

1:6 Scale 14th Doctor head from 60th Anniversary Specials
by Leighton Humphrey

Download: https://drive.google.com/file/d/1nzArsNNzWyucUN74U0eYqaulqsut5gfy/

Notes: Based off of publicity photos of David Tennant as the 14th Doctor, looking about 12 years older than his 10th incarnation. This one is more or less in proper scale for 1:6 Big Chief figures, but to print at 5.5" scale, shrink to about 45% of original size in your slicer.

28mm Scale Alpha Centauri Miniature from The Curse of Peladon
by Mike Tongue

Download: https://www.thingiverse.com/thing:5754417

Notes: You can check out Mike's Patreon page for more Doctor Who miniatures, including several Daleks, Sea Devils, Silurians, Cybermen, Voc Robots, Autons, Davros, and even an Imperial Shuttlecraft.

38mm (1:48) Scale Doctor Who Miniatures
by Wayne Peters

Thingiverse page: https://www.thingiverse.com/wayne_peters/designs

Selected designs (more may be added later): Yeti, 60's Movie Dalek, Dead Planet Dalek, Invasion of Earth Dalek, Sontaran, 4th Doctor, TARDIS, Ogrons, Special Weapons Dalek, Genesis Dalek, Davros,


Notes: To print at a more traditional 28mm scale, simply shrink all miniatures to about 80% to 85% of current size.

1:6 Scale Multi-Colour Classic Daleks
by Edward Felix

Download: https://makerworld.com/en/models/92698

Notes: These Daleks are specifically designed for printing on newer generation multi-color FDM printers, which as it says on the tin, will allow you to print designs using up to four different colors of filament as once. (You should also be able to print them as regular STL files as well.)

Beep the Meep from The Star Beast (Comic Book)
by Neill Gorton

Download: https://www.thingiverse.com/thing:6331333

Notes: This solid sculpture was designed as a Christmas tree ornament, but can be resized to fit on your toy shelf. I had to expand mine by about 140% to reach slightly-taller-than-waist-height on a Character Options figure.

If you are looking for the 2023 TV version, you can find it here.

Dalek Defense Drone from Revolution of the Daleks
by Dalek Mechanic

Download: https://makerworld.com/en/models/142523

Notes: This sculpture is nearly the right size for 8" Mego figures, but if you want to print it at 5.5" Character Options scale, you'll need to shrink it down to about 85% of current size.
The eye stalk and cattle prod arm are incredibly thin, and aren't likely to print proplerly in either FDM or resin printing. I would recommend making a series of plane cuts as shown below to carve the figure up into manageable pieces. (You might also want to split the skirt vertically down the center to and print the left and right halfs of the skirt flat on the build plate to avoid ugly hemisphere overhang) Once you are done, you can use 1.5mm wide brass rods to replace the eye stalk and arms with something more durable.